Supermicro 5038K-i, Руководство пользователя

Страница: 144 / 146

C-2
SUPERSERVER 5038K-i User's Manual
Note: Do not interrupt the BIOS fl ashing until it has completed.
Note: If you cannot locate the "Super.ROM" fi le in your driver disk, visit our website
at www.supermicro.com to download the BIOS image to a USB fl ash device and
rename it "Super ROM".
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into
your USB drive and power on the system
3. While powering on the system, keep pressing <Ctrl> and <Home> simultane-
ously on your keyboard until your hear two short beeps. This may take from a
few seconds to one minute.
4. After locating the new BIOS binary image, the system will enter the BIOS
recovery menu as shown below.
Note : At this point, you may decide if you want to start with BIOS Recovery. If you
decide to proceed with BIOS Recovery, follow the procedures below.
5. When the screen shown above displays, use the arrow keys to select the item
"Proceed with fl ash update" and press the <Enter> key. You will see the BIOS
recovery progress as shown in the screen below.