Supermicro 1020A-8, Руководство пользователя

Страница: 41 / 100

Chapter 5: Advanced Serverboard Setup
5-7
5-5 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-3 below for the colors and locations of the various I/O ports.
Figure 5-3. Rear Panel I/O Ports
5-6 Installing Memory
CAUTION
Exercise extreme care when installing or removing memory modules
to prevent any possible damage.
1. Insert each memory module vertically into its slot, paying attention to the notch
along the bottom of the module to prevent inserting the module incorrectly (see
Figure 5-4). See support information below.
2. Gently press down on the memory module until it snaps into place.
Note: each processor has its own built-in memory controller, so CPU2 DIMMs
cannot be addressed if only a single CPU is installed. It is recommended that you
remove the power cord from the system before installing or changing DIMMs. 128
MB, 256 MB, 512 MB, 1 GB, 2 GB* and 4 GB* memory modules are supported.
*With Opteron 246 C-stepping CPUs and above.
Mouse (Green)
Keyboard
(Purple)
VGA Port (Blue)
USB 0/1 Ports
COM1 Port
(Turquoise)
JLAN1 / JLAN2