13
ATTACHING THE CASTERS
1) Turn the stand (A) upside down (Fig. 1).
2) Place a 3/8” lock washer on the caster
stud (B). Screw the caster into the
threaded hole on the bottom of the stand.
Repeat for the other three casters.
3) Tighten the caster by hand, then secure
it with a thin 14mm wrench.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s).
Remove the rust-preventative oil from unpainted surfaces using a soft cloth moistened
with mineral spirits, paint thinner or denatured alcohol. Do not use highly volatile
solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine. After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
For your own safety, do not connect the machine to the power source
until the machine is completely assembled and you read and understand the entire
instruction manual.
ASSEMBLY TOOLS REQUIRED
Phillips head screwdriver 12 mm and 14 mm wrench
ASSEMBLY TIME ESTIMATE
30 minutes to 1 hour
This machine is heavy. Use two or more people when lifting.
ASSEMBLY
Fig. 1
A
B