OEM MOPA Light Sources. User Manual.
Document ID:
SL.3328.01.000RE / Rev. 1.0, Date: 25/09/2020 Page
2
of
23
GENERAL WARNING
Before using this Light Source, ALL users should read this manual and fully understand
how to operate this Light Source.
ABSOLUTE MAXIMIM RATINGS WARNING
Failure to comply with the following requirements may result in the catastrophic failure
of the Light Source.
Parameter
Min
Typ
Max
DC supply voltage, V
9.0
12.0
15.0
DC supply current, A
–
–
3
Remote Port input voltage, V
0
5
8
Remote Port input current, mA
–
8
15
Remote Port output voltage, V
–
5
20
Remote Port output current, mA
–
–
10
LASER SAFETY WARNING
This Light Source emits invisible light that may have a potential hazard associated with
CLASS 3R to 3B of IEC 60825-1. For further information regarding laser safety and
laser classification of the Light Source please contact SUPERLUM.
Warranty
Superlum products are guaranteed for a period of one year from date of delivery, against any faults caused
by manufacturing errors or proven intrinsic material faults as long as the products have NOT been
transformed, incorrectly installed, wrongly used or repaired by the buyer/user. Superlum will conduct analysis
of the failures and undertake to repair or replace any product failing under the above-mentioned conditions.
Notification of any Claim under this warranty must be submitted in writing within 1 week from discovery to
Superlum giving specific details of the fault. The product must be returned to Superlum not later than the
expiry date of the warranty. Shipping costs incurred, are not covered by this warranty. Failure Root Cause
analysis is carried out free-of-charge after warranty expiry date.
