OEM MOPA Light Sources. User Manual.
Document ID:
SL.3328.01.000RE / Rev. 1.0, Date: 25/09/2020 Page
13
of
23
DO NOT
remove the optical dust cap until a clean FC/APC connector is immediately ready to insert into the
unprotected optical output port.
IMPORTANT!
If discrepancies are found when comparing the observed optical output or spectrum to the ATR please contact
SUPERLUM before further using the Light Source. Using the lightsource without identifying the cause of the
observed discrepancies may result in a reduction of the expected lifetime of the device.
The user should regularly compare actual device performances to those originally specified in ATR
while using the Light Source.
