manualshive.com logo in svg

Superior MONIA, Инструкция по установке, использованию и техническому обслуживанию, Страница: 31 / 44

Поделиться
Скачать
Superior MONIA Скачать руководство пользователя страница 31

H07023380 / DT2000477-03

English

Description of activity

Display

SMOKE CHAMBER PRESSURE

DT2011666-00

Remember to maintain the safety distances indicated previously.
Be careful, take all due precautions and always comply with the instructions.
If during operation smoke leaks from any part of the stove or the fl ue, shut the stove down immediately and ventilate the room. When the stove has cooled, 
check for the cause of the leak and if necessary call in specialist personnel.
The stove is fi tted with several safety devices to guarantee safe operation.

During operation some parts of the stove (door, handle, ceramic parts) can reach high temperatures.

The safety devices are fi tted to eliminate the risk of injury to people and pets and damage to property. Tampering or work carried out 
by unauthorised personnel can jeopardise this function.

6.12  SAFETY DEVICES

DT2010223-01

On request the stove may be supplied with a remote control, which can be 
used to govern certain stove functions.

- 

Startup/Shutdown

: by pressing the two + keys simultaneously the stove 

can be turned on or off.
- 

Power level:

 when operating normally, pressing the + and - keys above 

the fl ame symbol will select one of the four power levels of the stove.
- 

Temperature

: when operating normally, pressing the + and - keys above 

the thermometer symbol will select the desired room temperature (7°C - 
30ºC). 

6.11  REMOTE CONTROL (OPTIONAL)

DT2011646-00

DT2030079-0

SUPERIOR

+

+

-

-

Fig. 46

WHAT TO DO 

- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm will stop.
- Call the After-Sales Service Centre.

WHAT TO DO 

- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm will stop.
- Wait until combustion of any pellets remaining in the grate has fi nished.
- After having cleaned the grate, restart the stove by pressing the ON/OFF key. (The readout ALL 
must no longer appear on the display. If this is not the case call the After-Sales Service Centre).

The pressure switch is connected to the fl ue gas outlet, its function is to control the vacuum 
inside the outlet duct so that the stove can be used in all safety.
The pressure switch is activated if there is a change in the conditions required for correct 
operation in the fl ue gas outlet duct (incorrect installation, blockages or obstructions in the 
fl ue, poor maintenance, unfavourable weather conditions such as persistent wind, etc.) the 
pressure switch cuts off the power supply to the fuel-loading auger, thereby stopping the 
supply of pellets to the grate and starting the stove shutdown process.
- The readout ALL appears on the right display and the time (e.g.: 12:30) or the temperature 
on the left display, depending on the initial settings.

- The readout “ALL” appears in the STATE STOVE

 (

stove status) mode.

- After approx. 30 seconds the alarm buzzer sounds (if activated).

At the time of stove startup, correct pressure-switch operation is checked so that the appliance 
may be used in all safety.
- If any irregularity is found in the pressure switch, the readout ALL (in the case of pressure 
switch failure) appears on the right display and the time (e.g.: 12:30) or the temperature on 
the left display, depending on the initial settings.

- The readout “ALF 2” appears in the STATE STOVE (stove status) mode.

- After approx. 30 seconds the alarm buzzer sounds (if activated).

31

Содержание MONIA













































Отзывы:

Нет отзывов