SuperiorFireplaces.us.com
900743-00D
20
INSTALLATION
Continued
Figure 32 - Placement of Glowing Embers (shown with Platinum Bright Embers)
Figure 31 - Platinum Bright Embers
Glowing Embers (rockwool)
Flat Front Burner
Ember Material
VOLCANIC STONE PLACEMENT
•
Add Volcanic Stone; Volcanic Stone may cover
1/2 inch of the front burner(fl at metal ember
pan burner) but shall not be allowed to come
in contact with either the burner ports or fl ame
around base of appliance if desired.
DO NOT
place rock or additional logs on front burner
or on logs except as directed above.
Placing
any material on unit other than ember material
on front burner may result in production of car-
bon monoxide or soot. A switch log is included
with each log set. This log is designed to house
a switch on remote ready models. On variable
remote models, this switch is not needed. The
log can be placed on the fl oor of the fi replace
to enhance the look of the log set. Use Volcanic
Stone to hide wires from switch/log to control
valve. Place switch/log so the switch is easy
to access.
Two ember materials are supplied with this log set.
Platinum Bright Embers give a bright glow appearing
as hot coals. Should embers need replacing, see
Accessories
,
Page 37
.
EMBER PLACEMENT
•
Platinum Bright Ember placement.
Add em-
bers to front, fl at burner. Gently remove embers
from bag. Separate pieces of ember material
and place on surface of fl at burner just behind
horizontal ports as shown in
Figure 31.
• Glowing Embers placement.
Place glowing
embers material on front fl at burner in areas away
from ports as shown in
Figure 32
.
WARNING: ALL PREVIOUSLY AP-
PLIED LOOSE MATERIAL MUST BE RE-
MOVED PRIOR TO REAPPLICATION.
WARNING: Do not use any other
ember material not supplied with
this unit.
WARNING: Do not operate unit
without ember material correctly in place
as shown in
Figures 31 and 32
. Do NOT
place ember material anywhere else on
the unit. Use only ember material sup-
plied with unit. Excessive or incorrectly
placed ember material may produce car-
bon monoxide or soot. If replacement
embers are needed, the replacement
embers must be purchased from IHP.
See
Page 39
for part numbers.
