Superior Signal Company LLC
AccuTrak
®
VPE-
1000 User’s Manual
© 2015
10
Selecting the Sensor:
Press the “MODE” button three times. The alphanumeric display will read “Air”.
The instrument will wait 3 seconds after releasing the MODE button for you to
press the
“
” or “
” button which locks in the sensor selection. If you press the
“MODE” button again, the alphanumeric display will read “Pr
o
b”, and wait 3
seconds for you to press the “
” or “
” button to lock in Probe as your sensor
selection.
Adjusting the Display:
The alphanumeric display offers three viewing options. Continuous, Peak and
Off. Press the “MODE” button twice. The display will read “Disp”. Then by
pressing the “
” or “
” buttons it will scroll through the display options which are
as follows...
“Cont”
= Continuous, the A.N.D. will show the level of the signal in
real time.
“Peak”
= Peak Hold, the A.N.D. will hold the highest reading for 5
seconds.
“Off”
= Turns the alphanumeric display off (with the exception of a
(
“
-
“). Since this display is not necessary for most airborne applications, turning it
off can save a substantial amount of battery.
NOTE:
The adjustments you have just made are now in memory, and will remain
there until they are changed or if the battery is removed.
“Hidden” MODE Options
There are other features that the “MODE” button can be used for.
Checking the serial #...
While the unit is powered OFF, hold down the
“MODE” button. Now turn the unit on while holding down the “MODE” button.
The VPE-1000 will show its serial number in the alphanumeric display.
