Series TA/TX/TXR
Page 8
Jan 07, 2015
Configurations
Table 1: Configuration Information
Note:
-
Baffles are always placed in the last section of radiant tube.
-
Baffles are either aluminized or stainless steel sections 6' long.
-
When only 6' is required an aluminized steel baffle is installed, except on the TA/TX/TXR-40
where a special 6' stainless steel baffle with a red identification tab must be installed.
-
When 12' is required the aluminized steel baffle is lengthened forward
(toward the burner)
with a
6' stainless steel section.
Part numbers for reference are:
CT016
Baffle for TA/TX/TXR-40 only, 6' long, stainless steel with red identification tab.
CT007
Baffle 6' long, aluminized steel
CT006
Baffle extension, 6' long stainless steel.
The following special configurations are also approved:
60,000 BTU/Hr
15' heat exchanger with 6' Stainless steel baffle with red tab (Natural Gas Only)
80,000 BTU/Hr
40' heat exchanger with no baffle or 6' aluminized baffle.
100,000 BTU/Hr
40' or 50' heat exchanger with no baffle or 6' aluminized baffle
125,000 BTU/Hr
40' or 50' heat exchanger with 6 aluminized baffle
150,000 BTU/Hr
60' heat exchanger with NO baffle
205,000 BTU/Hr
50' heat exchanger with a 4' baffle at 40', and a 8' baffle at 50'. (See Figure 3)
Figure 3: Baffle Location TA/TX/TXR-205 Models
Model
High Rate
(BTU/Hr)
Low Rate
(BTU/Hr)
Heat Exchanger Length
(ft.)
Baffle
Length (ft.)
Minimum
Maximum
TA/TX/TXR-40
40,000
30,000
10'
20'
6'
TA/TX/TXR-60
60,000
45,000
20'
30'
6'
TA/TX/TXR-80
80,000
60,000
20'
30'
12'
TA/TX/TXR-100
100,000
75,000
20'
30'
12'
TA/TX/TXR-125
125,000
95,000
30'
50'
12'
TA/TX/TXR-150
150,000
115,000
40'
60'
6'
TA/TX/TXR-175
175,000
130,000
50'
60'
-
TA/TX/TXR-205
205,000
160,000
60'
70'
-
TA/TX/TXR-220
220,000
165,000
60'
70'
-
50'
Fold
Over
40'
3'-6"
PN CT026
7'-6"
PN CT027
Fold
Over
BAFFLE LOCATION FOR ALL 205,000 BTU/Hr, 50 ft. UNITS ONLY
(P/N CT095 Baffle Kit)
