![superior fires F500452 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/superior-fires/f500452/f500452_installation-and-user-instructions-manual_1403199013.webp)
5. Finally, take the four remaining pebbles and place at the back of the fuel
matrix as shown in figure 17.
Once again, the pebbles may be orientated as desired in order to give a
realistic effect. Avoid pushing the pebbles down between the supports.
The fuel bed layout is now complete.
IMPORTANT :
The fire is designed to operate correctly with
the pebbles supplied when assembled according to the
instructions. Never add to the sixteen pebbles, or change
them for a different type. Never throw rubbish or other mat-
ter onto the fuel bed.
Due to the light colour of the pebbles, some
discolouration/sooting is to be expected during normal use.
1. Refer back to section 6.0 - Fuel bed layout (coal effect option) and fol-
low steps 1 and 2. The fuel effect matrix used for log effect versions is
the same design as coal effect versions, but has a different surface finish.
The front log strip is of a different design and must be handled with care.
Position them as shown in figure 18.
2. Open the bag of 9 moulded ceramic logs. All of the logs except two
are the same. Take the largest log (numbered 16) and place it as shown.
Care should be taken to ensure that the orientation is correct and the
log fits snugly into its position.
3. Take the two medium sized logs (numbered 15 and 8) position the log
numbered 8 on the left hand side as shown in figure 20, ensuring correct
orientation. Place the log numbered 15 on the right hand side as also
shown in figure 19, again ensuring correct orientation. Both these logs
will fit securely into their allocated position, they may require rotating
slightly to ensure this.
4. Now take the remaining large log (numbered 4) and position vertical-
ly as shown in figure 21, ensuring correct orientation. The base of this log
must rest securely on the front log strip. Take one of the smaller logs
(numbered 14) and position in between the two vertically positioned
logs ensuring the orientation is correct. Keep the spacing between these
logs uniform.
Figure 17
6.1 FUEL BED LAYOUT
(PEBBLE EFFECT) - CONTINUED
GB IE
6.2 FUEL BED LAYOUT
(LOG EFFECT)
Figure 18
Figure 19
Figure 20
Figure 21
5
©
2011 Focal Point Fires plc.