superior fires CORINTHIA BLACK NG Скачать руководство пользователя страница 12

The appliance should be checked on an annual basis to ensure it is working safely and that there is no excessive build up of soot.
The frequency of service will depend on usage, but MUST be carried out at least once annually.  Servicing must be carried out by
a GAS SAFE registered person.

The Installation instructions carry full servicing details for the use of the installer.

PART NO.

ITEM

F960003

Inner glass door assembly

F730023

Pilot assembly

F730085

Gas valve (Corinthia models)

F730086

Gas valve (Meridiana and Merrion models)

TRAY116

Burner unit (Corinthia models)

TRAY111

Burner unit (Meridiana and Merrion models)

F780079

Catalyst 

(seal kit must also be supplied)

F940136

Seal kit for Catalyst

7.0 SERVICING

8.0 LIST OF REPLACEMENT PARTS

9.0 INSTALLATION DETAILS

Installer GAS SAFE registration No : 

Model :

Fire serial No. :

Name & contact details of installer :

Supplied by :

10.0 SERVICE HISTORY

Date of service

Serviced by (name): 

Contact details of Engineer

GAS SAFE No. : 

As our policy is one of continuous improvement and development , we hope therefore you will understand we must retain the right to amend details and/or specifications without prior notice.

3

©

2011 Focal Point Fires plc.

F861079

GB IE

Date installed :

Содержание CORINTHIA BLACK NG













Отзывы: