Superior Fireplaces WRE6036IH Скачать руководство пользователя страница 8

Страница: 8 / 32

SuperiorFireplaces.us.com

127008-01_H

FIREPLACE INSTALLATION

Continued

HEARTH EXTENSION

A hearth extension projecting a minimum of 20" in front of and a

minimum of 12" beyond each side of fireplace opening is required

to protect combustible floor construction in front of fireplace. Fabri-

cate a hearth extension using a material which meets the following

specifications: a layer of noncombustible, inorganic material having a

thermal conductivity of k=0.84 BTU IN/FT, HR. F (or less) at 1" thick.

For example, if the material selected has a k factor of 0.25, such as

glass fiber, the following formula would apply:

0.25 x 1.0" = 0.30" thickness required

0.84
Thermal conductivity "k" of materials can be obtained from manufac-

turer or supplier of noncombustible material. If hearth extension is

to be covered, use noncombustible material such as tile, slate, brick,

concrete, metal, glass, marble, stone, etc. Provide a means to prevent

hearth extension from shifting and seal gap between fireplace frame

and hearth extension with a noncombustible material (see Figure 6).

WARNING: Hearth extension is to be installed only

as shown in Figure 6.

Figure 6 - Hearth Extension

MANTELS

A mantel may be installed if desired (see Figure 7). Woodwork such as

wood trims, mantels or any other combustible material projecting from

front face must not be placed within 12" (36" Models) or 18" (42/50"

Models) of fireplace opening. Combustible materials above 12" (36"

Models) or 18" (42/50" Models) and projecting more than 1

" from

fireplace must not be placed less than 15" (36" Models) or 21" (42/50"

Models) from the top opening of the fireplace (NFPA 211, Section -

Clearance from Combustible Material).
Mantels or any other combustible material also may come up to side

edge of black metal face of fireplace as long as projections from front

face fall within limit shown in Figure 7.

Figure 7 - Mantel Clearances to Combustible Material

Seal Gap

Fireplace Front

Ember Protector

Fireplace Front Raised

Hearth

Fireplace Front Elevated

Ember Protector

Seal Gap

Hearth

Extension

(312 mm)Ref.

6" (153 mm)

Ref.

15" (381 mm) Min.

(36" Models)

21" (534 mm) Min.

(42/50" Models)

12" (305 mm) Min.

(36" Models)

18" (458 mm) Min.

(42/50" Models)

" (39 mm)

Max.

3" (77 mm)

Nom.

33°

Combustible

Material

Safe Zone for

Projection of

Combustible

Materials

Fireplace Opening

Upper Section

of Fireplace

FIREBOX

SAFE ZONE

Top View of Fireplace

" (115 mm)

" (197 mm)

36" Models

" (293 mm)

(42/50" Models)

Min. to

Perpendicular

Side Wall

12" - 36" Models

18" - 42/50" Models

33°

Combustible

Material Must Not

Overlap Front Face

3" (77 mm) Max.

Содержание WRE6036IH

































Результаты поиска

Содержание WRE6036IH

Отзывы:

Похожие инструкции для WRE6036IH

Бренды по названию

Популярные бренды

Superior Fireplaces WRE6036IH, Инструкция по установке и эксплуатации

Результаты поиска

Содержание WRE6036IH

Отзывы:

Похожие инструкции для WRE6036IH

Бренды по названию

Популярные бренды