TABLE OF CONTENTS
Safety Rules and Specifications for
Mobile or Manufactured
Home Installation .........................Page 2
Introduction ......................................Page 3
Parts Required .................................Page 3
Optional Equipment ...........................Page 3
Operating The WCT6820WS
Fireplace ..........................................Page 3
Fuel ...................................................Page 3
Starting And Maintaining A Fire ........Page 4
Combustion Control .........................Page 4
Refueling For Best Performance .......Page 4
Smoking – Causes And
Troubleshooting ..............................Page 4
Important Cautions ...........................Page 5
Maintaining Your Fireplace ................Page 5
Creosote ............................................Page 5
Chimney Maintenance .......................Page 5
Dealing With A Chimney Fire .............Page 5
Finish Door Casing Care ....................Page 7
Disposing of Ashes ...........................Page 7
Refractory Installation .......................Page 7
Door Installation ...............................Page 7
Door Adjustment ...............................Page 7
Facade Installation ............................Page 8
Hearth Extension Requirements ........Page 8
Cold Climate Installations ..................Page 8
Framing Dimensions .........................Page 9
Nailing Flanges ..................................Page 10
Facing And Mantel ............................Page 10
Fireplace Blower ................................Page 11
Hot Air Ducting Installation ..............Page 11
Gravity Kit .........................................Page 11
Outside Air Kit ..................................Page 12
Chimney System ...............................Page 13
Chimney Installation Notes ...............Page 13
Chimney Installation Instructions ......Page 14
Offset Chimney Installation ...............Page 15
Angled Wall Radiation Shield ............Page 17
Glass Care - Replacement .................Page 18
Glass Care - Cleaning ........................Page 18
Gasket Replacement ........................Page 18
Fireplace Installation ........................Page 18
Chimney Support Installation ............Page 19
Chimney Chase And
Multiple Terminations......................Page 19
Masonry Application Instructions .....Page 20
Installation Accessories ....................Page 21
Replacement Parts ............................Page 22
Specifications ....................................Page 22
Clearances to Combustibles ..............Page 22
Chimney Components Lists ..............Page 23
Warranty ..........................................Page 25
Product Reference Information .........Page 26
THE FIREPLACE
INTRODUCTION
The WCT6820WS wood-burning fireplace is
an energy efficient, heat circulating, closed
combustion fireplace. You will receive a lifetime
of comfort and enjoyment from your fireplace
provided it is installed, maintained and oper-
ated properly.
•
Please read these instructions and retain
this manual for future reference.
•
Before beginning the fireplace installation,
consult the local authorities to obtain your
building permit and check your local building
codes. Install the fireplace only as described
in these instructions and using only IHP
components.
• This fireplace has been tested for CAN/ULC
S610-M87 and ANSI/UL 127 under report
number 307-4084. It has also been tested
for EPA 40 C.F.R Part 60, section 60.532(b).
Certificate number 537.
•
The WCT6820WS fireplace is NOT intended
for use with a gas log set. Do not use a
fireplace insert or any other product with
this fireplace unless it is specified by IHP
for use with this appliance. Failure to follow
these instructions will void the certification
and the warranty of the fireplace and may
result in an unsafe installation.
• These appliances are designed to provide
supplemental heat to the immediate area
only. Therefore, it is advisable to have an
alternate heat source when installed in a
dwelling.
PARTS REqUIRED
Fireplace Model WCT6820WS
• 6” diameter chimney
*
- Model ASHT+,
S-2100+, , or AC
manufactured by Security Chimneys Inter-
national™ only, including:
- Chimney lengths
- Elbows
(where necessary)
- Associated components as per these
installation instructions
•
..
Decorative Door
- Required
....
(Order Separately - See
Page 21)
•
Front Facade kit - Required
...
(Order Separately - See
Page 21)
•
UZY5 blower
(included in the fireplace).
•
VRUW Blower Speed Control
(included)
•
Outside air kit
(Included w/Fireplace)
OPTIONAL EqUIPMENT
• Additional Equipment (optional)
- Forced Air Kit
u
- AC Chimney Adaptor
*
- AC Chimney Outside Air Kit
CONGRATULATIONS!
When you purchased your new fireplace, you joined the ranks of thousands of individuals
whose answer to their home heating needs reflects their concern for aesthetics, efficiency
and our environment. We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new fireplace.
Thank you for selecting a IHP fireplace as the answer to your home supplemental heat-
ing needs.
- Gravity Venting System
- Rigid Firescreen
u
u
Not tested under EPA certification. If
installed, this appliance no longer quali-
fies for EPA certification. Check with local
authorities having jurisdiction for require-
ments in your area.
OPERATING THE FIREPLACE
Fuel -
USE SOLID NATURAL WOOD FUEL
ONLY. This appliance is designed to burn dry
seasoned natural wood only (see Page 6 for a
list of prohibited fuels). Failure to burn proper
fuels only will void the certification and the
warranty of the appliance.
Hardwoods are pre-
ferred to softwoods since the energy content of
wood is relative to its density. Hardwoods will
result in a longer burning fire and less frequent
refueling. A moisture content of 15% to 20%
(seasoned) is recommended. Wood that has
been cut and split and let to dry under a cover
for a period of one year will usually meet that
criteria. The required drying time will vary
depending on the climate. Wood that is packed
tight together will take longer to dry. Seasoned
wood is darker in color than wet wood and will
have visible cracks in the grain on the ends.
Excessively wet wood will be difficult to burn
and will result in lower efficiency, increased
creosoting and deposits on the glass and in
the chimney. Excessively dry wood will burn
well but will also have higher emissions and
shorter burning time.
DO NOT OVERFIRE THIS HEATER
Attempts to achieve heat output rates that
exceed heater design specifications can result
in permanent damage to the heater.
First Fires
Before using the fireplace make sure to remove
the plastic wrapping and EPA label on plated
door. Remove any glue residue left by the
label using mild soap.
The first five or six fires should be small fires of
short duration (about 30 to 60 minutes). This
will help cure the refractory bricks. During the
first few fires of this appliance there may be
some odor and smoke due to the curing of the
paint, dust accumulation and burning off of
lubricants used in the manufacturing process.
It may set off a smoke alarm located in the same
room. For this reason the room should be well
ventilated for the first few fires.
*
Available from Security Chimneys™
3
