background image

NOTES

Diagrams, illustrations and photographs are not to 

scale –  consult installation instructions. Product 

designs, materials, dimensions, specifications, colors 

and prices are subject to change or discontinuance 

without notice.
All framing dimensions include sheathing.
* The fireplace must not be in contact with any insula-

tion or loose filling material. Cover the insulation with 

Drywall panels around the fireplace.

Figure 11  - Framing Dimensions

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Facing

1.  Combustible material must be installed flush 

with the fireplace.  It may not project in front 

of and on the fireplace (i.e. the steel facade 

of the fireplace) 

(

Figure 16A

)

.

2.  Non-combustible materials such as brick, 

stone or ceramic tile may project in front of 

and onto the fireplace facing 

(

Figure 16A

)

.

    IMPORTANT

The facade must be removable once 

installed. The facade is designed to overlap 

any facing material installed on the front of 

the fireplace. If thicker material is installed, 

use the facade as a template and make sure 

it can be easily removed for servicing.

Outside Chase

* Zero Clearance 

from Back 

Spacer to Wall

Back Wall of Chase / Enclosure

Including Finishing Materials, if any

Rough Framing Face (unfinished shown)

37-1/4

(946)

2 x 3 Min.

(header)

Rough Framing Face

(dimension includes finish 

material inside framing, if any)

Plywood 

1/2”

56

37-1/4

87

(1422)

(946)

(2210)

u

Inches (millimeters)

K

Combustion Air Kit

8” (203) Minimum (allow space when framing)

Combustion Air Kit

  25-1/8*

(638)

Combustible materials can NOT be used 

in the space directly above the fireplace. Do 

not fill the space above the fireplace with any 

material (Except the wood framing)

* For flush framing installations

(248)

9-3/4

14-7/8

25-1/8

11-1/2

1

* Heatflo Vent Outlets

*

(26)

(292)

(378)

(638)

30

(762)

25-3/4”

6

7-7/8

9-3/4

(200)
(248)

56

(1422)

(654)

(153)

3-1/4

(83)

25-3/4

(654)

9-3/4

10-1/4

(248)
(261)

(2013)

Corner Installation

1

21

79-1/4

39-5/8

56

(26)

(533)

(1007)

(533)

(1424)

21

12-1/4

38

37-1/4

22-5/8

(311)

56

(1422)

(575)

(946)

(965)

** To standoffs

**

36

(914)

11

Содержание WCT4920WS

































Отзывы: