SuperiorFireplaces.us.com
126817-01F
27
OPERATION
Continued
ON
Figure 54 - Low Battery Display
FAHRENHEIT/CELSIUS INDICATOR
You can set your hand-held remote control to dis-
play the temperature in either Fahrenheit or Celsius.
With remote control off, press THERMOSTAT button
and MODE button at the same time. This will toggle
the display from °F to °C.
Figure 55 - Remote Control Display
Fahrenheit to Celsius
Figure 56 - Hand-Held Remote Control
ON/OFF
MODE
UP/ DOWN
Arrows
THERMOSTAT
LCD Display
HAND-HELD
REMOTE OPERATION
BATTERIES
WARNING: Make sure your selec-
tor switch is in OFF position before
installing or changing batteries in
your hand-held remote or receiver.
WARNING: Fireplace can turn on
suddenly. Keep away from burner.
For installing or replacing batteries in remote con-
trol or receiver, see Installing Batteries in Remote
Control and Receiver on
Page 16
.
Low Battery - Hand-Held Remote Control
When batteries in hand-held remote control are
low, an icon will appear on display.
Low Battery - Remote Receiver
When batteries in receiver are low, no acoustic signal
will be given when ON/OFF button is pressed. If bat-
teries in receiver are low, fi replace can be switched
on manually by moving remote selector switch to ON
(see
Figure 52
)
.
OPERATING REMOTE CONTROL
After lighting pilot, let pilot fl ame burn for about
one minute. Slide remote selector switch to RE-
MOTE position. You can now turn burner on and
off with remote.
IMPORTANT: Do not leave selector switch in
REMOTE or ON position when pilot is not lit. This
will drain batteries.
When any button is pushed on remote control,
LCD display will glow blue. Blue glow will go off
after several seconds if no action is being taken
with remote.
ON/OFF
Push ON/OFF button and burners will come on in
high position
(see
Figure 56
)
. An acoustic signal
from the receiver confi rms the command.
Push ON/OFF button again and burners will turn
off.
A beep from receiver confi rms the command.
