If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Locate the power strip (image a), the GFCI Protector (image b), the Smart
Plug(s) (image c), the 3-IN-1 adapter (image d), and the inline fan controller
(image e).
DO NOT PLUG IN THE POWER STRIP YET.
2.
Plug in the following from left to right:
Properly configured Power Strip Should look like this
1) Inline Fan
2) Internal Circulation Fan
Plug the 3-IN-1 adapter in the far plug on the power strip
3) Plug the first Smart Plug in and then the Kind LED
light into the Smart Plug
4) Air Pump
(Hydro Only)
5) Plug the second Smart Plug in and then the Water
Pump into the Smart Plug
(Hydro Only)
Final Assembly
KIND LED
LIGHT
INLINE
FAN
AIR PUMP
(Hydro Only)
WATER PUMP
(Hydro Only)
INTERNAL
CIRCULATION FAN
a
b
c
d
e