If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Locate your Yo-Yo light hangers (image a).
2.
Loop the carabiner end over the top support of the tent and clip it to itself
(image b). To adjust height, pull on the lose string to raise the Yo-Yo or
press the button on the side of the Yo-Yo hanger to lower.
3.
Unpack your KIND LED Grow Light(s).
4.
Locate your the Wire Hangers (image c). Connect the wire hangers to
each of the metal hangers on the light (image d).
5.
Place the Kind LED Light in the bottom of the tent. Lower the Yo-Yo
system until you can connect the other ends of the cable assemblies to the
Yo-Yo carabiners (image e). Raise the light to the desired height using the
loose end of the Yo-Yo hanger cord.
6.
Run the power cord from the LED light through the nearest electrical port
hole.
Hanging your LED Light
1.
Locate the Thermometer/Hydrometer (image e). Remove the battery cover
and remove the plastic safety blocker from the battery terminal. You can
be creative on where you would like this placed inside the tent, but the
easiest placement is inside the tool pouch on the inside of the tent.
2.
Run the external probe to the outside of the tent, through the nearest
ducting port. Make sure the probe is not touching any surface on the
outside of the tent as this will provide false readings.
3.
Locate the Clip-On Active Air Fan (image f). Clip the fan to any one of the
inside corner vertical poles. The fan is designed to provide circulation and
air movement.
Thermometer/Hydrometer/ICF
a
b
c
d
e
f
