If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Unpack KIND LED Grow Light (image a).
2.
Locate your Hanging Hardware Kit. Using the four (4) shorter lengths of
cable and the (4) small carabiners, (image b) connect one cable assembly
to each of the brass hangers on the light (image c).
We have set the light on a convenient Yo-Yo system so the height can be
adjusted as your plants grow. To lower the light, simply press the button
located on the side of the Yo-Yo and adjust to the desired height. To raise
the light pull upward on the end of the Yo-Yo cord.
4.
Place the Kind LED Light in the bottom of the cabinet. Lower the Yo-Yo
system until you can connect the other ends of the cable assemblies to the
Yo-Yo carabiners (image d). Raise the light to the desired height.
5.
Run the power cord from the LED light through the nearest Elbow opening
to the back of the cabinet.
Hanging your LED Light
1.
Locate and unpack the remaining T5 Light Strips in your package. Attach
the power cord and affix one T5 to each side of your cabinet, via the
magnetic backing, in the main growing chamber (image e). Run cords
through the nearest Elbow opening.
Installing your T5 Side Lights
a
b
c
d
e
