manualshive.com logo in svg

Superabrasive Lavina 20, Руководство пользователя

Поделиться
Скачать
Superabrasive Lavina 20 Скачать руководство пользователя страница 9

Superabrasive 

Owner’s Manual - Lavina 20

®

  

09/2009 

 

Refers to Lavina 20

®

 Lavina 20

®

E 

 

9

Arrest Functions 

 

 

Functions of arrest of the machine are as follow: 
Button to stop the motor (category 1) 
Emergency button (category 1) 
 

Safe Use 

 

 

 

The Lavina 20

®

 is designed to eliminate all risks correlated with its use. However, it is not possible to 

eliminate the risks of eventual accident with the machine. Correlated residual risks may be caused by 
unskilled or uninstructed operator. Such risks are: 

Position Risks

   due to operator’s incorrect working position   

Tangling up Risks

 

due to wearing inappropriate working clothes  

Training Risks 

 

due to lack of operational training  

NOTE: In order to reduce all consequences of the above mentioned risks, we advise that machine 
operators follow the instructions in the manual at all times. 
 

Residual Risks  

 

 

During the normal operating and maintenance cycles the operator is exposed to few residual risks, which 
cannot be totally eliminated due to the nature of the operations. 
 

Before You Begin 

 

 

•

 Working area must be clear from any debris or objects. 

•

 A first-time operator must always read the manual and pay attention to all safety instructions. 

•

 All electric connections and cables must be inspected for potential damages. 

•

 Ground wire system of the power supply must be also inspected. 

•

 Perform general daily inspections of the machine and inspect the machine before each use.  

•

 Always inspect the safety devices: 

ƒ

 

the emergency break must be clear and working 

ƒ

 

the tool protector must be working 

ƒ

 

the machine must be clean 

•

 Never operate the machine in the rain! 

•

 Confirm that there are no missing parts especially after transportation, repair or maintenance. 

•

 Before filling the water tank with water make sure the machine is not working and the main switch is 

turned off. 

•

 Before turning on the machine make sure that the base is placed on the floor; the machine MUST NOT 

be in an upright position when turned on!  
 

Operating the Machine 

 

When operating the Lavina 20

®

, make certain that there is no one, but you around the machine. Never 

leave the machine unattended while working. 
The electrical cable must move freely and must be damage-free. 
The water hose must move freely and must be damage-free. 
Check if the floor, you work on, is too uneven. If this is the case, it may damage the machine. 
 

After Work is Completed 

 

Clean the machine and its surroundings properly  
Empty and clean the water tank 
Unplug the machine and wind up the electrical cable 
Store the machine in a safe place 

Содержание Lavina 20
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды