manualshive.com logo in svg

Superabrasive Lavina 20, Руководство пользователя

Поделиться
Скачать
Superabrasive Lavina 20 Скачать руководство пользователя страница 55

Superabrasive 

Owner’s Manual - Lavina 20

®

  

09/2009 

 

Refers to Lavina 20

®

 Lavina 20

®

E 

 

55

Return Policy for LAVINA 20

® 

 
LAVINA 20

®

 machines may be returned, subject to the following terms: 

 

•

 In no case a machine is to be returned to Superabrasive Inc. for credit or repair without prior 

authorization. Please contact Superabrasive Inc. or your local distributor for an authorization and 
issuance of a return authorization number. This number along with the serial number of the machine must 
be included on all packages and correspondence. Machines returned without prior authorization will 
remain property of the sender and Superabrasive Inc. will not be responsible for these. 
 

 

•

 No machines will be credited after 90 days from the date of invoice. 

 

•

 All returns must be shipped freight prepaid. All returns may be exchanged for other equipment or parts 

of equal dollar value. If machines are not exchanged, they are subject to a fifteen percent (15%) 
restocking fee. 
 

DISPOSAL

 

 
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive 
or a local distributor, where a professional dismantle complying with the environment laws and directives 
is guaranteed. 
 
 
 

MANUFACTURER’S CONTACTS

 

 
If you need to contact Superabrasive Inc. with technical support questions, below is the contact 
information. 
 
 
SUPERABRASIVE Inc. 
9411 Jackson Trail Road  
Hoschton, GA 30548 
USA 
Email: [email protected] 
Tel.: (678)714-6840 or Toll Free (800) 987- 8403 
Fax: (678)714-6858 
Website: www.superabrasive.com 

 

 

Содержание Lavina 20
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды