Superabrasive Lavina 20, Руководство пользователя

Страница: 10 / 55

Superabrasive Owner’s Manual - Lavina 20
®
09/2009
Refers to Lavina 20
®
Lavina 20
®
E
10
The Work Area
Make certain that people or vehicle do not enter the work area.
Avoid cables and hoses being on the way.
Always check the floor for debris
Equipment
Always wear safety shoes when working with the machine.
Always wear ear protectors when working with the machine.
All personnel in the immediate work area must wear safety glasses with side shields.
Always wear safety gloves when changing the tools.
Always wear clothes suitable for the work environment.
Operator
Only one operator at a time can work with the machine.
The operator must be properly trained and well instructed prior to operating the machine.
The operator must understand all the instructions in this manual.
The operator must understand and interpret all the drawings and designs in manual.
The operator must know all sanitation and safety regulations pertaining to the operation of the Lavina 20
®
machine.
The operator must know the machine’s work environment.
The operator must have floor grinding experience.
The operator must know what to do in case of emergency.
The operator must have an adequate technical knowledge and preparation.
HANDLING AND TRANSPORTATION
Preparing the machine for transportation
Unplug the motor cable plug from the control box and disconnect the water hose from the head by pulling
it out (Fig.4). Wind the electrical cable on the carriage (Fig.5). Release the pin sets that attaches the head
to the carriage (Fig.6). Pull out the water hose and the vacuum hoses, and dismount the head from the
carriage (Fig.7). The head of the Lavina 20
®
has one handle and one support intended for easy moving
and transportation (Fig. 8)
Figure 4
Figure 5
Figure 6