Super X10SLX-F, Руководство пользователя

Страница: 78 / 109

4-14
X10SLX-F User’s Manual
•
CAS Latency (tCL)
•
Minimum Delay Time
•
CAS to RAS (tRCDmin)
•
Row Precharge (tRPmin)
•
Active to Precharege (tRASmin)
Memory Frequency Limiter
This feature sets the limit of memory frequency for DIMM modules installed
on the the motherboard. The options are
Auto, 1067 (MHz), 1333 (MHz), and
1600 (MHz).
Max TOLUD (Top of Low Usable DRAM)
This feature sets the maximum TOLUD value, which specifies the "Top of Low
Usable DRAM" memory space to be used by internal graphics devices, GTT
Stolen Memory, and TSEG, respectively, if these devices are enabled. The op
-
tions are Dynamic , 1 GB, 1.25 GB, 1.5 GB, 1.75 GB,. 2 GB, 2.25 GB, 2.5 GB,
2.75 GB, 3 GB and 3.25 GB.
Note: TSEG is a block of memory that is only accessible by the processor
while operating in SMM mode.
Memory Scrambler
This feature enables or disables memory scrambler support for memory error
correction. The settings are
Enabled and Disabled.
Thermal Throttling
Select CLTM to support CLTM for better onboard memory thermal management[.
The options are Disabled and
CLTM .
Memory Refresh Rate
When this feature is set to Auto, the x2 ratio will be used when the temperature
of onboard memory becomes "warm or hot"; otherwise the x1 ratio will be used
during the normal condition. Select Always x1 to use the ratio of x1 regardless
the temperature of the onboard memory is hot or cool. The options are Always
x1 and
Auto .