Super Superserver 5038ML-H24TRF, Руководство пользователя

Страница: 51 / 108

Chapter 5: Advanced Motherboard Setup
5-7
Caution: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage to the DIMMs or their sockets
5-6 Installing Memory
How to Install Memory
1. Insert the desired number of DIMMs into the memory slots in the following
order: DIMMA1, then DIMMB1, DIMMA2, DIMMB2. Pay attention to the notch
along the bottom of the module to prevent incorrect installation. the P1 slots
corresponds to node 1 DIMM slots and P2 slots are for node 2
2. Insert each DIMM module vertically push down until it and snaps into place.
Repeat to install more memory, if needed. See instructions on the next page.
Memory Support
Each X10SLE-DF supports two nodes; each node supports up to 32GB of unbuf-
fered (UDIMM) ECC DDR3-1600/1333 VLP (Very Low Profi le) memory in four
slots. Populating these DIMM slots with a pair of memory modules of the same
type and size will result in interleaved memory, which will improve memory per-
formance. Please refer to the table below.
Figure 5-3. DIMM Installation
Release Tabs
Notches
Press straight down
into the DIMM slot.