940-GSM4
4 Advanced Operations
Set Clock
Set the camera date and time.
You can change the date and time by setting this parameter
when necessary, e.g., after every battery change. The date
format is month/day/year, the time format is hour: minute:
second.
Time Lapse
Time lapse is a feature where the camera will capture images
or videos at a preset time interval regardless of whether
motion is are detected. If the parameter is Off, then the time
lapse feature is disabled. Changing this parameter to a
non-zero value turns on the Time Lapse feature.
NOTE
: If PIR Trigger is set to Off, then Time Lapse cannot be
set to Off.
PIR Trigger
Choose the sensitivity of the PIR. In high sensitivity mode the
camera is more easily triggered by motion; it takes more
pictures and/or records more videos. Use High sensitivity in
a room or environment with little interference, and Low
sensitivity outdoors, or in environment with lots of
interference like hot wind, smoke, near a window, etc. For
normal use, Normal sensitivity (default) is recommended.
PIR interval
This parameter indicates how long the PIR motion sensor will
be disabled after each triggering in ON mode. During this
time, the PIR will not react to motion.
The minimum interval, 0, causes the PIR to stay on.
Work Hour
Choose a time period for the camera to function. The camera
will wake at the time set and remain on for the duration. At
other times, the camera is in sleep mode to save power. If
Work Hour is OFF, the camera will always be on.
Send to
There are 3
Send to
modes:
1.
Phone MMS: send images to mobile phone.
2.
Email GPRS: send images to an e-mail address via GPRS
use SMTP.
3.
Call: calling your preset phone number when the camera
is triggered.
Setup the receiving phone number and email address in the
app program.
13
