Super Circuits 1, Руководство пользователя

Страница: 28 / 60

MENU FUNCTION
-24-
6.4.7 Network
In this menu list, you can set up the network. For detailed network setup, please refer to the section “3.6 LAN or Internet
Setup” at page 9.
Move the cursor to “NETWORK”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE NETWORK
CAMERA
NETWORK TYPE STATIC
DETECTION DNS 168. 95. 1. 1
DISPLAY PORT 0080
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
The submenu items are described below:
1) NETWORK TYPE
There are 3 network types: STATIC, PPPOE and DHCP.
‧
STATIC
Select NETWORK TYPE, press “
＋
” or “
－
” button to set the network type as STATIC, and then press “ENTER” to
go to the submenu of the network. In the submenu of network type, use “
＋
” or “
－
” button to set all the information
needed in the DVR. See the example below, and refer to the section “3.6.1 STATIC IP” at page 9 for details.
STATIC
IP 160 . 121 . 346 . 236
GATEWAY 160 . 121 . 346 . 236
NETMASK 255 . 255 . 255 . 254
‧
PPPOE
This PPPoE function needs to have one “username” and one “password” subscribed from one ISP supplier.
For detailed PPPoE settings, please follow the AP (Licensed Software AP) setup, and then refer to the section
“3.6.4 Dynamic IP
－
DHCP” at page 11, and “(1) DDNS” in section “ 7.5.1 Network” at page 37.
‧
DHCP
The DHCP function needs to be supported by a router or a cable modem network with DHCP services.
For detailed DHCP settings, please follow the AP (Licensed Software AP) setup, and then refer to the section “3.6.3
Dynamic IP
－
PPPOE” at page 10, and “(1) DDNS” in section “ 7.5.1 Network” at page 37.
Note: DHCP and PPPoE network types need to apply DDNS services to get “Hostname” to correspond to the
dynamic IP address. For detailed DDNS settings, please refer to “(1) DDNS” in section “7.5.1
Network” at page 37.
2) DNS
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80.
Note: Typically, the TCP port used by HTTP is 80. However in some cases, it is better to change this port
number for added flexibility or security.