MENU FUNCTION
-23-
The submenu items are described below:
1) SERIAL
TYPE
Press “ENTER” or “
＋
” / “
－
” button to set the serial type of the DVR (RS-485 / RS-232).
2) BAUD
RATE
Press “ENTER” or “
＋
” / “
－
” button to set the baud rate of the DVR (2400 / 9600 / 19200 / 57600).
3) HOST
ID
Press “ENTER” or “
＋
” / “
－
” button to set the ID of the DVR (0 ~ 255).
4) IR (For Model 4 & 5)
Press “ENTER” or “
＋
” / “
－
” button to enable or disable IR function (ON / OFF).
5) PASSWORD
Press “ENTER” to reset the password for accessing the DVR system (ADMIN PASSWORD or GUEST PASSWORD).
You can set the password up to 4 digits.
Note:
Users
who use guest password to access the DVR will be only allowed to view the live streaming video
and sequence display, shift the channel display, and lock keys.
6) RESET
DEFAULT
Press “ENTER” to reset all settings as default, and select “YES” to confirm or “NO” to cancel.
7) CLEAR
HDD
Press “ENTER”, and select “YES” to confirm to clear HDD or “NO” to cancel.
8) UPGRADE (This function is only for Model 1, 2, 4 and 5)
Press “ENTER”, and select “YES” to confirm upgrade or “NO” to cancel.
Note:
To use this function, you need to have the upgrade file saved in a compatible USB flash drive, and
insert it into the USB port at the front or rear panel.
Note:
Do not disconnect the power of your DVR while the upgrade process is in progress, or the DVR
functions may not work normally or be unable to use.
9) R.E.T.R. (MIN) (For Model 5)
‧
R.E.T.R. Activation
Press “MENU” + “
－
” buttons on the front panel to enable R.E.T.R. function 3 / 5 / 10 minutes later. A message
“R.E.T.R. ON” will be shown on the screen (in white text), and after the RETR function is activated, the message
“R.E.T.R.” shown on the screen will turn to red.
‧
R.E.T.R. Off
Press any key (except “
” or “POWER” buttons) and enter the password to turn off the RETR function.
10) AUTO KEYLOCK
Set the time-out in second after which the key lock function is activated (Never / 10 / 30 / 60).
11) LANGUAGE (Support multi-language)
Press “ENTER” to select the language of the OSD.
12) VERSION
Here shows the firmware version information.
13) VIDEO FORMAT
Here shows the information of the DVR video format (NTSC / PAL).
