manualshive.com logo in svg

Super B BCI, Руководство пользователя

Поделиться
Скачать
Super B BCI Скачать руководство пользователя страница 48

48

8.  Storage

Follow the storage instructions in this manual to optimize the lifespan of the BCI during 
storage. If these instructions are not followed and the BCI is not functioning anymore, 
consider it to be damaged. Do not attempt to use it. Replace it with a new BCI . No 
special measures are needed for storage other than observing temperature and humidity 
requirements (see 4.3).

9.  Transport

No special measures or restrictions apply to transport and shipment of the BCI. If it is shipped 
together with Super B Li-ion batteries, lithium battery legislation applies. In that case, check 
the manual of the Super B Li-ion battery. Contact your distributor or Super B directly in case 
of doubt.

10.  Disposal

The BCI is classified as “Small IT waste”.
The BCI is compliant with WEE and RoHS.

WEEE

The European Waste Electrical and Electronic Equipment Directive (WEEE) applies to a wide 
range of electronic and electrical products. WEEE encourages the collection, treatment, 
recycling and recovery of waste electrical and electronic equipment. WEEE makes producers 
and importers responsible for financing of the collection, treatment and recovery of WEEE. 
Reference: The Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU.

RoHS

The RoHS Directive will ban placement into the EU market of new electrical and electronic 
equipment containing more than designated maximum allowable levels of lead, cadmium, 
mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl 
ether (PBDE) flame retardants, effective June 8th, 2011. 

RoHS works in conjunction with the EU WEEE Directive. RoHS supports WEEE by reducing 
the amount of hazardous chemicals used in production.  In turn it reduces the risk of 
exposure to recycling staff as well as reduction in recycling costs.  Manufacturers will 
need to ensure that their products, parts and components comply with RoHS in order to be 
distributed and sold in the EU. Reference RoHS Directive 2011/95/EU.

Содержание BCI




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды