manualshive.com logo in svg

Super B BCI, Руководство пользователя

Поделиться
Скачать
Super B BCI Скачать руководство пользователя страница 32

32

6.2.  Configuring the BCI and the battery bank

Before the BCI and battery bank can be used, the BCI needs to be configured and the 
batteries need to have a unique battery node ID. Configuring the BCI and the batteries can be 
done by using the Super B Be in Charge Software.
For connecting the BCI to a computer, a CAN to USB converter is required, see table 12. 
Refer to Figure 15 for connecting the CAN to USB converter to the BCI.

6.3.  Battery ID’s

In multi-battery systems, each battery shall have a unique Node ID number. The default 
Node ID for a Super B Li-ion battery is 10. This number shall be changed depending on 
the configuration. If a complete system has been ordered at Super B, the Li-ion batteries 
will have been preconfigured and renumbering is not necessary. If this is not the case, 
renumbering can be done manually.

Any Node ID number between 2 and 100 can be assigned to a Li-ion battery. Node ID 1 should 
not be used for Li-ion batteries as it is reserved for the BCI. We recommend not to use Node 
ID 10 for multi battery configurations as it may be confusing in case a Li-ion battery is added 
to the system.

Multiple Li-ion batteries with the same number will result in unpredictable behavior of the 
system.
 
It is recommended to label the Li-ion batteries with their assigned node ID. Try to number the 
Li-ion batteries in such a way that the battery bank configuration (number in parallel, number 
in series) can be easily recognized. For example, in a 4 series 2 parallel system use node ID 
11, 12, 13, 14 for the four Li-ion batteries in series and node ID 21, 22, 23, 24 for the other four 
Li-ion batteries in series.

6.3.1.  Battery ID renumbering procedure

Use the following procedure to renumber the node ID for each battery in the system.

1.  Connect one Li-ion battery to the CAN Master bus (see figure 15). 

Содержание BCI




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды