11
2. INSTALL PEDALS
A. Install and tighten the pedals using the
15 mm open wrench
. Look for a letter
marking “L” “R” on each respective pedal and make sure you install the left pedal on
the left crank, the right pedal on the right crank.
B. The right pedal is screwed on in a clockwise direction. The left pedal is screwed on by
turning it counter-clockwise.
You may also use a
6mm hex wrench
at the tip of the pedal threading
.
3. TIRE INFLATION
For transport purposes, tires are packed partially inflated. Tires must be inflated using a
pump with a Schrader valve tip to a recommended 27 - 30 psi (1.86 - 2.06 bar).
A. Inflate the tube to a max pressure of 35 PSI in order to ensure the tire is properly
seated in the rim.
B. Once properly seated, deflate to a recommended 27 - 30 PSI (1.86 - 2.06 bar). PSI
will vary based on the weight of rider and type of terrain.
The inner tube size is 20”x5” or 20”x4.5” for the rear and the front.
TIP
TIP
A
B
