10
1.
HANDLEBAR INSTALLATION
A. Use the
5mm hex wrench
to remove the bolts of the handlebar clamp.
B. Once the clamp is open, place the lower crossbar of the handlebar in the groove of
the top crown.
C. Loosely tighten the handlebar clamp with the
5 mm hex wrench
, and adjust the angle
of the handlebar to riders comfort.
D. Cross tighten the handlebar clamp from corner to corner making sure the clamp is
tight and handlebars do not move.
ASSEMBLY INSTRUCTIONS
DANGER !
Do not ride with a bike that has not passed 100% safety verification before each ride as
described in the section pre-ride safety check on pg. 14.
A
C
D
B
