Supaswift SSU420ACM, Руководство оператора

Страница: 14 / 22

14
1. Loosen bolt on both sides of mower. Refer to red circles on Fig. 31 & Fig. 32.
2. Loosen nuts on bottom of adjustment screw. Refer to red circle on Fig. 33 & Fig. 34.
3. Turn the adjustment screw on both sides, to cause the rotational blade to make contact with the bottom
blade. The blade must only ‘just’ make contact, whilst still allowing it to rotate freely. Refer to red circles
Fig. 35 & Fig. 36.
4. Re-tight nuts. Fig. 33 & Fig. 34.
5. Re-tighten bolts. Fig. 31 & Fig. 32.
6. Test the cutting action with paper as previously described. Should the paper not cut satisfactorily, the
cylinder may need to be sharpened, please refer back to youtr local Supaswift dealer.
BLADE ADJUSTMENT
WARNING
Ensure engine is stopped before making any adjustment. The engine
switch must be in “OFF” position and spark plug lead disconnected.
!
FIG. 31
FIG. 32
FIG. 34
FIG. 33
FIG. 35
FIG. 36