Supaswift PR2800, Руководство пользователя

Страница: 19 / 39

15
PRE-OPERATION CHECK
Starting the Engine
1. Make sure that the AC circuit breaker is in the OFF position. The generator may be hard to start if a
load is connected.
2. Turn the fuel valve lever to the ON position.
3. Turn the choke rod to the CLOSED position.
4. Move the engine switch to the ON position.
5. Pull the starter grip lightly until resistance is felt, then pull briskly.
NOTICE
Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage
to the starter or housing.
6. As the engine warms up, slowly push the choke rod to the OPEN position.
Stopping the engine
In an emergency:
To stop the generator in an emergency, turn the engine switch to the OFF position.
In normal use:
1. Turn the AC circuit breaker to the OFF position.
2. Turn the engine switch to the OFF position.
3. Turn the fuel valve lever to the OFF position.