Glider user's manual
| SAVAGE
SUPAIR
| SAVAGE
| page 8
Setting up the glider
Opening the wing
Without twisting the risers, connect them to the harness connection loops
using the carabiners. Check for the risers to be properly positioned and un-
twisted. The "A" risers must be located at the front and facing the flight direc-
tion( see schematic ). Lastly, check for the main carabiners to be fully closed
and locked in place.
Risers
Carabiners
Flight direction
Choosing an adapted harness
Install the speed system according to your harness manufacturer's
recommendations. Connect it to the wing using the split hooks.
Once the accelerator/speedbar is connected, adjust its length accor-
ding to your measurements. For correct use, there must not be any
tension on the split-hook level when the accelerator/speedbar is not
activated by the pilot.
Choose a flat or lightly angled training hill without obstacles or wind.
Open your wing and arrange it in a crescent shape.
Check the fabric and the lines for any sign of wear or damage.
Check for the links connecting the lines to the risers to be fully closed.
Identify, separate and arrange the A,B and C risers as well as the brake lines neatly. Knots or tangles
can not be present.
The SAVAGE glider was certified EN C with a EN1651 & LTF certified harness and can therefore be flown
with most harnesses models found on the market today.
We wil advise you to choose a EN1651 and or LTF certified harness with a built-in back protection sys-
tem.
Connecting the wing to the harness
Installing the speed system
