Glider user's manual
| SAVAGE
SUPAIR
| SAVAGE
| page 10
Pre-flight preparation
Unfold the glider and place it on its upper surface in an arc.
Separate the A,B,C risers and the brakes, be certain for the risers and lines not to have any twists or knots or be hooked to a branch,
stone etc...
The SAVAGE glider was designed for cross-country pilots wishing to fly far and fast. The glider itself gives a sporty feeling similar to
the one fed by competition gliders within a much more accessible EN-C package. It is lightweight, ideal for bivouac adventures.
To discover your new wing, we will advise you to conduct your first small flights in calm conditions on a school training hill or a fami-
liar site you are used to flying with your own harness.
Caution !
It vital to conduct a thorough pre-flight check and have the harness properly connected to the glider prior to each takeoff.
Run through the following procedure prior to each takeoff :
- Harness and carabiners do not show signs of wear and tear.
- The reserve parachute container is correctly closed and the handle is in the correct position
- Your personal settings have not been altered
- The wing is properly connected to the risers with all links securely tightened and locked in place.
- The risers are properly connected to the harness without any twist.
- You are securely connected to the harness with the leg and chest strap buckles closed, carabiners locked.
- Your are wearing your helmet and it is properly fastened.