6
It is normal for the battery charger to hum and be warm but not hot during operation. If the battery does not charge
properly, check to make sure the electrical outlet is "live" and that the air surrounding the battery and charger is
between.
Make sure the battery is correctly fitted.
Always charge the battery before storage. To reduce risk of fire, never leave the battery on the
charger for more than 24
Operating Instructions
Maintenance
Caution:
Switch off and remove the battery before carrying out any maintenance on the tool.
No Lubrication is necessary, the bearing area sealed.
After each use, carefully clean the blower with a brush or rag. Clear any debris from around the moving
parts.
Switching on/off (Fig5)
1. Fit a charged battery as shown in previous section
2. Hold the tool in both hands keeping moving parts
away from yourself, bystanders and any other
objects. Ensure it is safe to start it and warn
bystanders.
3. Squeeze the trigger
4. Direct the airstream into the area to be cleaned.
Work gradually in an arc pattern.
Sweeping/cleaning (Fig6)
1. Start the blower before approaching the work area so
as allow it to reach full speed and so debris is not
accidentally thrown.
2. Be aware that the tool could reach in your grip when
the stream of air contacts objects.
3. Stand with a good posture and be aware of your
surroundings, keep 2 hands on the blower and
control with firm even pressure.
4. Clear larger areas by swinging the blower in an arc.
The blower is designed for cleaning dry leaves from
hard surface, not clearing debris from grassed areas.
Figure 4
Figure 5
Figure 6
1. Remove the battery pack from the blower.
2. Place the charger in a safe position away
from moisture, heat or any hazard to the
charger or other danger.
3. Push the charging plug of the AC adaptor
into the battery.
4. Connect the AC adaptor to the power supply
point. Please allow 3-5 hours of charge time
and then remove from the adaptor.
