Remove WSU43+ product packing or assembly and make
sure all components are included.
Under normal use, the camera maintains a charge with exposure to
sunlight. A battery status indicator is provided on the monitor when
the camera is in use. If you're storing your car in a garage (or not
exposing the camera to sunlight on a regular basis) for more than
one month, you may need to recharge it via the DC charging port.
During the whole DC charging, the red indicator light will keep on. It will turn of
f when finishing
the charging.
When the DC charging is done for a period of time, you can vibrate the camera and immediately
touch the
Touch-Sensor
on the monitor to see the increase in charging. The battery capacity
icon on the screen shows the actual status of the camera's built-in battery power.
Charge the Camera with license plate holder
1. Connect the supplied DC cord to the
charging port of the Camera.
2.
Plug the cable USB port into any
standard USB charging adapter with
an output rating more than 5V/1000mA.
3.
Charge 4 to 5 hours.
1. Shake the camera in the air.
2. Touch the
Touch-Sensor
quickly and check the image after the
monitor is powered.
* In the process of use, there is wireless interference from outside sometimes.
If no connection normally, the device will shut of
f automatically 10 seconds later.
Then please touch the
Touch-Sensor
to turn it on.
Camera has to be waken up from sleeping status by little vibration.
1
4
Charging LED
1
Camera with license
plate holder
2
Monitor
3
Suction cup holder
4
Stand holder
5
Vent holder
6
USB connection
8
Small screw x1
9
Assembly tool
10
DC Charging cable
1
1
Screws & nuts
1
2
License plate
mounting hole
1
3
Solar panel
1
5
Charging socket cover
1
6
Charging socket
1
7
Backup camera
1
8
Screw hole
19
+
button
20
Menu / OK button
21
-
button
22
Bracket holder
23
Touch sensor
24
Screen
Scope of delivery / parts.
Power cable with
car adapter
7
- 3 -
- 4 -
