It is best to have a video image displayed when making this selection.
(
Short Press
means press and hold 1 second, and
Long Press
means 3 seconds).
Only Short Press - button [DEC] to switch the Parking guide Lines
display modes (Display or No display)!
While the monitor is showing the rear image, short press the middle button
[MENU/OK] to enter the main menu interface, and 5 options are available
(Pairing, Image Parameters, Image Mirror, Parking Guideline
Adjustment,
Software Information).
Pairing
Image
Paramete
Image
Mirror
Software
Information
Parking Guideline
Position Adjustment
Meaning
Operating
Pairing
Image
Paramete
Image
Mirror
Parking Guideline
Position Adjustment
Software
Information
Default setting,
no need to
operate again.
To adjust Brightness
Contrast, Color.
Operation details
as Image Parameter
info.
Set Upwards/Downwards
or Original/Mirror Image.
Operation details as
Image Mirror contents.
Select “Software Info”,
press [ADD] or [DEC]
button to display
software version
information.
The parking guidelines can
be adjusted up and down
as needed. Operation details
as Parking Guideline Position
Adjust info.
If you want the Backup Camera WSU43+ to keep working after the setting time
of image-display(for example, you cannot finish reversing your vehicle during the
first setting time), you have to touch the
Touch-Sensor
once again.
After you have been staying inside vehicle quietly (eg. sleeping) with vehicle
engine stopping, you want to see the backup image but only put your vehicle key
on the ACC-ON position (no starting the engine), there is no image on the monitor
after touching the
Touch-Sensor
. So you have to give the vehicle a light vibration
(such as re-open and shut car door, or tap somewhere lightly), then touch the
Touch-Sensor
to start work.
3. When the vehicle is shut of
f, power is removed from the monitor and
the monitor will shut of
f automatically, and the camera will stop work.
07.
While the monitor is showing the rearview image again, short press
[MENU/OK] to enter the main menu interface, select the "Image Mirror"
icon and long press [MENU/OK], to set upwards or downwards image.
After setting, short press it twice again continuously to exit the setting.
-
+
M
+
-
- 9 -
- 10 -
