12
11. Press
to confirm
changes.
12. Press
to exit.
Note:
Press
at any time while programming to
exit without making any changes.
13
Using Learning Mode to Setup
The remote has the ability to learn how to
operate any infrared controlled device.
Before you start using the remote’s learning
function, heed the following precautions:
• To change from a device that has already
been programmed, delete all of the
commands for the first device before
teaching new ones. For example, to
operate the living room TV instead of the
bedroom TV, delete all commands for the
bedroom TV first. (To delete, refer to
Deleting Key Codes or Deleting Device
Key’s Settings).Then reconfigure the TV
device screen for the living room TV.
• Code learning does not work with all
devices.
• All keys except the
,
,
and
can be learned.
1. Set both remotes on a flat
surface, so that the target
device remote’s IR is
pointed to the unit’s
LEARNING EYE. Keep
them distance 2-4 inches
apart.
Note:
During learning, please keep pressing each
learnt key of the original remote until the “OK”
message appears on the screen of SRC-3200
and hear a beep. For some special codes, you
might have to learn all keys twice as general
operation. As you see “ERROR” message
appears but hear TWO beeps during learning,
please press each learnt key of the original
remote once again until you see the “OK”
message and hear only ONE beep. Otherwise,
you will see the “ERROR” message blinking once
and hear THREE beeps if the learning fails.
