SUNWARD SWE25UF, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 106

10
Tighten, repair, or replace any clamps, pipe, hose, oil cooler, and flange bolt of oil cooler.
Don’t twist or knock on high-pressured pipe.
Don’t assemble twisted or damaged pipeline or hose.
⚫
Inspect short circuit. The short circuit of electric system can cause fire.
Before every shift or 8-hour operation, check loosened, twisted, hardened, or cracked cable
and wire.
Before every shift or 8-hour operation, check lost or damaged connectors.
Before operation, tighten, repair, or replace any loosened or damaged cable, wire and
connector. If the cable or wire is loosened or twisted, don’t operate the machine.
⚫
Repair switch
Before everyday operation, check the function of key switch and engine emergency stop
switch. If there is any unusuality, repair at once. In case of fire, if you can’t stop engine, it will
aggravate firepower, and may cause GBH.
⚫
Clean out inflammable materials
Spilled fuel, stored breeze, and other inflammable materials may cause fire. Keep the
machine clean every day to prevent fire.
1.35 EMERGENCY EXIT
Emergency exit mark is shown in right figure
：
When there is an emergency and the operator can not
get out of the cabin, take the small hammer hung on
the wall in cabin to break the window with
emergency exit mark to leave the machine. The cabin
safety structure can not be repaired after damage but
it can be replaced with other qualified safety
protective structures.
1.36 Noise and vibration
The emission sound pressure level at the operator's and the sound power level of machine are
1. Pay attention not to be hurt by the splashing objects while
breaking the window with a certain distance to the breaking hole
for safety.
2. The breaking hole should be big enough for operator to get out
(according to operator ’ s own condition) and the hole should have
no sharp spines for safety.