Select 207 XLS User / Installation Instructions
Page 4 of 8
If your programme gets ‘scrambled’, or if you want to start again, press the reset button using
a non metallic tool to re-load the default programmes, then press any button to clear the DIP
switch configuration code. The unit should revert time setting mode ready for programming.
USING ADVANCE
This function is only available when programme is in
AUTO
or
ALLDAY
operating modes.
To advance central heating
Press the CH 1 channel
ADV
button. This will turn the Central
ON
if it’s in an
OFF
period and
OFF
if it’s in an
ON
period. It will stay in this state until either
ADV
is pressed again, or until a
programmed
ON/OFF
period commences. The word
ADV
will appear in the top left hand
corner of the MODE box
USING +Hrs.
For +Hrs. Central heating
, press the left hand + Hr. button. One press of the button will give
one extra hour of heating. Two presses of the button will give two extra hours of heating.
Three presses of the button will give the maximum of three hours extra heating.
If the Central heating mode is
OFF
, then it will switch on for the extra hours selected. If the
Central heating mode is
AUTO
or
ALLDAY
, then during an
OFF
period it will switch on for the
extra hours selected. If during an ON period, then it will temporarily extend that programme by
the number of hours selected.
For +Hrs. Hot water
. Press the right hand +Hrs. button. One press of the button will give one
extra hour of Hot water, two presses of the button will give two extra hours of heating and
three presses of the button, will give the maximum 3 extra hours.
To advance Hot water, press Hot water
ADV
button.
This will turn the Hot water
ON
if it’s in an
OFF
period and
OFF
if it’s in an
ON
period. It will stay in
this state until either
ADV
is pressed again, or until a
programmed
ON/OFF
commences.
The word
ADV
will appear in the top right hand
corner of the MODE box.
