Select 207 XLS User / Installation Instructions
Page 3 of 8
Press the
SET
button the
clock
icon on the screen will flash. Press the +/- buttons to adjust
the time. Hold down button to change time quicker.
Press
SET
button till the Y:00 icon (year) appears and the letter
D
flashes. Press the +/-
button to set the year. Press
NEXT
, N:00appears (month). Press +/_ button to set month.
Press
Next
. d:00 appears (day). Press +/- button to set day.
NOTE
:The unit will automatically return to run mode if a period of 5 minutes passes without
any buttons being pressed.
CHANGING PROGRAMME TIMES
The built in programmes for Central heating and Hot water can be easily changed to better
suit your needs.
If the unit is installed as a 7 day programmer, the initial programme displayed will be for
Monday. You can go to any day of the week by pressing the
DAY
button repeatedly. The
ON/OFF
times can be changed for each day as above in the “changing programme times”. If
you press the
COPY
button, the current programme will be copied onto the next day.
If the unit is installed as a 5 day/2 day programmer, the initial programme displayed will be for
Monday to Friday. Pressing the
DAY
button will take you to the programme for Saturday and
Sunday. The
ON/OFF
times can be changed for each day group as above in the “changing
programme times”. If you press copy, the current programme will be copied onto the next day
group.
If the unit is installed as a 24 hour programmer, the built in programme will be the same for
each day. The
COPY
function is not required if installed as a 24 hour programmer.
To return to
RUN
mode, press the
SET
button until the display indicates run on the display.
To change
HOT WATER programme.
Press
SET
button
until the ‘tap’ symbol appears and proceed exactly as Central heating
above.
NOTE:
It is not possible to copy Sunday to Monday.
For convenience, to allow for programmes to go past midnight, the programme day is from
03:00am to 02:50 am the next day.
To change the
Central heating
programme, press
SET
until the radiator icon flashes in the screen and
1 ON
appears. This indicates the time shown on the display is
the first
ON
time. Change this to the required
ON
time by
pressing the +/- buttons.
Press
NEXT
button, the display will now show
1OFF
.
Change as before.
Use NEXT and +/- buttons in this way to programme the
second time period.
If the unit is set for 3 ON/OFF periods, the number 3 will
appear . This is set in exactly the same way as the
previous first and second time period.
Setting the Time and Date
