data displayed in output files.
Data Settings
The Data Settings tab (Figure 30) allows you to configure the following settings:
Figure 30: Configuration Menu, Hardware
Data Source:
Select how Morning Surge, and Smoothness Index are displayed or calculated (i.e. using brachi
-
al or central BP values). A lower-case “c” will designate which values are set to use central BP values (e.g. HR
becomes cHR).
Additional calculations:
Select which additional parameters will be displayed when viewing a patient file.
Options include:
•
AASI
•
Smoothness Index
•
Morning Surge
•
White Coat Analysis
•
Coefficient of Variation
Selecting any of these options will make them visible on corresponding tabs and graphs.
Page 57 of 79
80-0062-00-RevL 2020-9-14
