3.
Enter the desired parameter settings in the
Measurement Schedule
(Figure 3). (See Parameter set
-
tings.) If the Oscar 2 has SphygmoCor Technology, central blood pressure readings can be turned on
or off as desired.
4.
Click one of the following:
•
Program
to transfer the information to the Oscar 2. An indicator bar shows the progress and
disappears when programming is successfully completed.
•
Cancel
to close the dialog box.
•
Help
to start the online Help.
Figure 4: Programming the Oscar 2 (Patient Information Window)
To create a patient in the database before conducting a study:
1.
In the
Programming Monitor
window, click the button for
Select/Create Patient
.
2.
Click
Create New Patient
.
3.
A new window
Patient Information
(Figure 4) will appear. Enter patient information.
4.
Click
OK
to save the patient information to be used on this programmed study. Click
Cancel
to close
the dialog box.
To add measurement periods:
1.
Click the
Add special period
button.
2.
Select a start time, an end time, and intervals from the pull-down menus. You can add up to two (2)
Page 22 of 79
80-0062-00-RevL 2020-9-14
