SunTech Medical SunTech 247 Скачать руководство пользователя страница 52

Страница: 52 / 78

TROUBLESHOOTING

The troubleshooting chart provides pointers on diagnosing issues associated with error or
status codes.

Troubleshooting - Blood Pressure Module

Problem: Wrong size cuff, Misplaced cuff, or Blocked brachial artery

Solutions:

Check that the cuff is in the correct position.

Check that the cuff is properly tightened.

Check that there is no excessive clothing between the arm and the cuff.

Check that the cuff applied is of the correct size.

The patient may have been moving too much.

Take another BP reading.

Problem: Too much patient or environment motion or conditions causing tremors

Solutions:

Check that the cuff is in the correct position.

The patient may have been moving too much.

Take another BP reading.

Problem: Air leak, Loose cuff, or Blocked or pinched hose

Solutions:

Check that the hose has no sharp bends or is pinched.

Check that the patient is not lying on the cuff.

Check that the cuff is in the correct position.

Check that the hose is connected to the system and the cuff.

Check that the cuff is properly tightened.

Check that the correct size cuff is being applied.

Check that the cuff is not leaking air.

Check that the hose connections are not damaged or loose.

Take another BP reading.

Содержание SunTech 247















































































Результаты поиска

Содержание SunTech 247

Отзывы:

SunTech Medical SunTech 247, Руководство пользователя, Страница: 52 / 78

Результаты поиска

Содержание SunTech 247

Отзывы: