SunTech Medical SunTech 247 Скачать руководство пользователя страница 21

Страница: 21 / 78

Information on the optional pulse oximetry module display

•

SpO

: At the end of a measurement, the functional oxygen saturation of the patient is

displayed. If the warning icon is lit, displays the status code. See page 42 for details.

•

Signal quality: During a measurement, indicates the quality of signal from the pulse
oximeter sensor.

•

Warning icon: When displayed, indicates that the system needs to be checked. See
page 42 for details.

Icons and Cues

Your

SunTech 247

is designed to provide unambiguous visual and auditory cues before,

during and after a measurement. For easy reference, all cues are tabulated in this chapter.

•

Audible cues, or beeps, identify stages in the measurement cycle.

•

Icons illuminated within a module’s display indicate measurement modes, processes
or warnings.

Auditory Cues

The temperature and BP modules of the

SunTech 247

are programmed with auditory cues. A

listing of these cues appears below.

NUMBER OF BEEPS…

INDICATES…

One short beep after power up or

right before powering down

The device is powered up and
ready use or the device is
about to turn off.

One short beep after

taking a measurement

Success – measurement
taken.

Three short beeps

BP measurement error.
Please check or take another
measurement.

Three long beeps

A system error has occurred.
Please refer to page 41 for
troubleshooting.

One short beep followed

by a long beep

You have aborted this BP
measurement.

Содержание SunTech 247















































































Результаты поиска

Содержание SunTech 247

Отзывы:

SunTech Medical SunTech 247, Руководство пользователя, Страница: 21 / 78

Результаты поиска

Содержание SunTech 247

Отзывы: