7. Check the shell for damage before reinstalling it.
8. Return all parts to their original position. The last thing to do is to put the O-ring into the cor -
rect position through the clamping plate screw.
9. When you reassemble the quartz glass, make sure there is no water in it. Hold the glass with
a dry cloth.
10. When installing the new hose, remove the clip; this can protect the clip from breaking. If the O-
ring is broken, it must be replaced.
11. Make sure that all sealing parts are cleaned and in place, especially the O-ring.
12. Finally, switch on the power supply to the pump and switch on the device.
Storage in winter
1. Clean the pump as described above.
2. Store the pump out of the water and in a place protected from frost.
3. Check the pump for damage before starting it up again.
WARNING:
The UVC unit must be disconnected from the power supply for all maintenance work.
Commissioning only when the UVC is
COMPLETELY
assembled.
Do not carry out any work on a running UVC unit.
The UVC unit must
NOT
be carried by its cable.
If there is frost, demount the UVC unit!
© by WilTec Wildanger Technik GmbH
Item 50341
Page 6
http://www.WilTec.de
http://www.aoyue.eu
01 2021
-1
