background image

X Series Dual Instructions 

Important: Read all instructions very carefully before installing your X Series Dual 

XHO ADD-ON KIT. Reef Brite will not be responsible for any damages that may 

result from improperly mounted or installed X Series kits. 

The X Series will add some weight to your light system so it is especially important to 

ensure your tank or mounting configuration can safely carry and distribute the additional 

weight of your X Series system. 

 

If unsure about the mounting and or attachment of the X Series system, we recommend 

contacting a licensed professional to avoid serious personal injury or property damage. 

If you have any questions before or during the installation of your X Series system, 

please contact [email protected] and one of our customer service representatives will 

be glad to assist you.  

For faster service please provide your phone number and a good time to call. Thank 

you. 

Getting started: Make sure your fixture(s) are unplugged from the electrical outlet 

and completely removed from the aquarium before attempting to install the X 

Series Dual system.

 

If your fixture was in use even for just a short period let cool.

 

LED’s can get hot 

during operation and can cause personal injury or damage surfaces if proper care 

in handling is not taken.

 

Once cool, place fixture on a secure table or work surface. 

 

 

 

 

 

 

 

 

Содержание X Dual Series














Отзывы: