PART NO. 690963 REV: A-01
32
These assembly and installation instructions have been provided by Sunstream
Corporation at the request of the potential installer and/or assembler. If you
are not an authorized Sunstream Dealer and are not a reasonably skilled me-
chanic, please contact Sunstream so that we can refer you to a local dealer
who can skillfully and safely perform the assembly and installation of your Sun-
stream boat lift.
It is the potential installer and/or assembler
’
s responsibility to determine
whether he or she has the necessary skills, knowledge, and tools to properly
and safely assemble and/or install the Sunstream Lift described herein. Im-
proper assembly and/or installation may cause the lift to function improperly or
not to function. Improper assembly and/or installation may additionally cause
a risk to personal safety or property. If the assembler and/or installer is con-
fused or has questions or concerns about a particular assembly or installation,
he or she should contact Sunstream by telephone at (253)-395-0500, Int
’
l
(001)-(253)-395-0500 before proceeding further. The information contained in
these instructions does not constitute a warranty or guarantee of any kind.
An assembler
’
s and/or installer
’
s failure to correctly follow these assembly and
installation instructions constitutes a waiver of the assembler and/or installer
’
s
rights against Sunstream regarding any subsequent damages to property or
personal injury caused by the assembler
’
s and/or installer
’
s improper assembly
and/or installation
.
Many boats today require specific bunk/support configurations; Multi-hull
boats, including but not limited to pontoon, tritoon, some V-hull and catamaran
style boats often require specific bunk configurations to properly support the
boat on a boatlift.
In some cases boat hull material and strake layout also may require
“
a custom
engineered
”
bunk configuration. Any boat on a Sunstream lift should be sup-
ported per boat manufacturer recommendations.
Contact the boat manufacturer to verify how to support the boat. Sunstream
is not responsible for determining the proper way to support each craft that
may go on a Sunstream lift. Inadequate support or incorrect position of a boat
on a Sunstream lift may result in damage to the boat. Sunstream does not
warrant that any bunk/kit configuration will support the hull/sponsons as the
boat manufacturer intends or requires.
Disclaimer of Liability