Sunstream BOAT LIFTS FL6012, Сборка и инструкция по установке

Страница: 15 / 28

TO MINIMIZING GALVANIC CORROSION, IT IS ESSENTIAL THAT SACRIFICIAL ZINCS ARE INSTALLED AND
MAINTAINED ON YOUR LIFT. ZINC IS USED AS IT HAS A HIGHER VOLTAGE IN WATER SO THE CURRENT
WILL BE MORE INCLINDED TO FLOW FROM IT. THE ZINC BECOMES THE CORRODING ANODE, WHILE THE
LIFT SERVES AS THE CATHODE AND IS PROTECTED FROM CORROSION.
IT IS IMPERATIVE THAT YOU REPLACE THE ZINC ON YOUR LIFT REGULARLY.
BECAUSE MANY EXTERNAL FACTORS AFFECT THE RATE AT WHICH A ZINC DETERIORATES, SUNSTREAM
RECOMMENDS THAT YOU CHECK IT'S CONDITION FREQUENTLY, AND CHANGE THE ZINC EVERY SIX
MONTHS OR MORE OFTEN IF NEEDED. ZINCS ON LIFTS IN COASTAL AREAS NEAR THE OCEAN
DETERRIORATE MORE RAPIDLY AND NEED TO BE CHANGED MORE FREQUENTLY. EFFECTS OF
GALVANIC CORROSION ARE NOT COVERED BY YOUR SUNSTREAM WARRANTY. NOT MAINTAINING
ZINCS ON THE LIFT CONSTITUTES ABUSE AND VOIDS THE SUNSTREAM WARRANTY.
PROTECT YOUR INVESTMENT WITH THE PROPER STEPS. TO COMPLETE THE ELECTRICAL CIRCUIT, THE
ZINCS MUST BE CONNECTED TO THE LIFT TIGHTLY AS SHOWN BELOW. SUNSTREAM RECOMMENDS
USING HIGH-QUALITY ZINCS THAT ARE AVAILABLE THROUGH SUNSTREAM SERVICE DEPARTMENT.
4X
NUT, .250 - 20, SS
SOCKET HEAD CAP SCREW, 1/4"-20 X 1.125
ZINC, 5.25" LONG, CMT 21, FLOATLIFT
12
FORM NO. PAGE 15 OF 28 REV. 690187
G-01