manualshive.com logo in svg

SUNSTONE Linear DC, Руководство пользователя

Поделиться
Скачать
SUNSTONE Linear DC Скачать руководство пользователя страница 6

6

Fuse

20A fuse included. 
Replacement fuse: Schurter Inc. Manufacturer #0034.3130. 

Fans

Airflow will come out of the unit from these locations and could be warm. The fans will not normally 
be spinning, but will turn on if the unit is hot.  They may turn on even if welder is not being used, but 
is turned on. *Do not block fans.

USB Port

USB flash drive can be inserted for updating the unit software *Use a 4GB stick of memory or less. 
*See Linear DC product page at www.sunstonewelders.com for update or contact a Sunstone 
representative.

Connecting Welding Attachments

CONNECT WELDING ATTACHMENTS

Sunstone Weld Head - automatic weld triggering

1.  Connect weld head cables to negative and positive terminals on the back of the Linear DC.
2.  Connect weld head actuation cable to “Weld Head Actuation” DIN connection port on the 

back of the welder.

3.  See weld head manual for instructions on weld head foot pedal setup. *Weld head foot 

pedal will control weld head up and down movement and weld triggering. 

Sunstone Weld Head - dual foot pedal triggering

1.  Connect weld head cables to negative and positive terminals on the back of the Linear DC.
2.  Connect included Linear DC foot pedal into  “Weld Discharge Trigger” DIN connection port 

on the back of the welder. *With this option users will not connect the weld head actuation 
cable to any of the DIN ports. 

3.  See weld head manual for instructions on weld head foot pedal setup. *Weld head foot 

pedal will control weld head up and down movement and Linear DC foot pedal will control 
weld triggering. 

Содержание Linear DC











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды